|
|
Kia Sportage>> Brake system>> Reading of codes of malfunctions of ABS/EBD, cleaning of memory of the processor
Reading of codes of malfunctions of ABS/EBD, cleaning of memory of the processor
Reading
|
|
- At ignition inclusion the electronic ABS/EBD control unit (ECU) carries out monitoring of a condition of components of each of contours of both systems. In case of violation identification in memory of the processor the corresponding code of malfunction is brought, and in a combination of devices of the car the corresponding control lamp (ABS or brake system) is activated.
- Reading kept in memory of the block of codes can be made by means of the special Hi-scan pr scanner connected to fixed on the case of an air purifier, to the diagnostic DLC socket equipped with a protective cover (see. Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases).
- Switch off ignition and connect the scanner to DLC.
- Include ignition and choose in the scanner menu the correct name of brand and model of the car (KIA Sportage).
- After initialization of the scanner choose an interrogated element.
- Activate procedure of a conclusion of codes of malfunctions (No. 1), - on the screen of the scanner all will start to be deduced being stored in memory of the processor of the module of management four-unit DTC.
|
|
Codes will continue to be deduced until memory of the processor will not be cleared. |
- Make necessary corrections, then clear memory of the processor.
|
|
Memory cleaning
|
|
- Having eliminated malfunction, make sure of serviceability of functioning of under control system (ABS/EBD), then activate procedure of cleaning of memory of the processor, - No. point of 4 menus, - and press the Enter key (Input) on the scanner keyboard.
|
|
|
|