| Type of automatic transmission |
4-step (including raising transfer) productions of the Aisin Warner company |
| Designation |
AW372LE |
| Type of system of greasing |
Pressure head with the oil pump |
| Type of system of cooling |
Two-level, with the additional heat exchanger |
| Hydrotransformer (rotation converter) |
|
|
3-element, 1-step, 2-phase, with the blocking mechanism |
Transfer relation of Stall-Test
|
1.9 |
| Oil pump |
|
|
The Trokhoidny rotor |
|
|
From the engine |
| Gear shifting mechanism |
|
|
1-step with a planetary reducer, 4 forward transfers, 1 back |
Positions of the lever of the selector
|
See. The section of Feature of operation of the cars equipped with the catalytic converter in Head Governing bodies and receptions of operation
|
|
|
Multidisk friction clutches of damp type
|
3 sets |
Multidisk brakes of damp type
|
4 sets |
|
|
3 sets |
|
|
|
|
2.826:1 |
|
|
1.493:1 |
|
|
1.000:1 |
|
|
0.730:1 |
|
|
2.703:1 |
| Turns of Stall-Test, mines-1
|
2000 ÷ 2300 |
| Distribution of the main pressure on single turns and at Stall-Test check |
See. Section of System of electric equipment of the engine
|
Codes of diagnostics of system of electronic control by the automatic transmission, taken by means of the OBD II scanner
| Bolt of fastening of the sensor switch of provision of transmission (PNP) |
3.9 ÷ 6.9 |
| Cap of the service union of check of the main pressure |
14.7 ÷ 17.6 |
| Bolts of fastening of transmission to a transfer case |
44 |
| Bolts of fastening of transmission to the engine |
|
|
57 ÷ 81 |
|
|
69 ÷ 88 |
| Bolts of a support of a suspension bracket of the power unit |
69 ÷ 88 |
| Bolts of fastening of a basic cross-section beam to a frame |
31 ÷ 46 |
| Shtutsernye of a nut of fastening of tubes of a path of cooling of ATF |
|
|
31 ÷ 47 |
|
|
24 ÷ 35 |
| Basic arm of lines of a path of cooling of ATF |
0.39 ÷ 0.58 |
| Bolts of fastening of pump assembly of AT |
6 ÷ 9 |
| Bolts of fastening of a sealing element of pump assembly |
18 ÷ 25 |
| Bolts of fastening of sections of klapanny assembly |
8 ÷ 12 |
| Bolts of fastening of a maslootrazhatel |
5 ÷ 6 |
| Bolts of fastening of the pallet of a case of AT |
4 ÷ 5 |
| Bolts of fastening of an adapterny cover |
27 ÷ 42 |
| Bolt of a fixing spring of the valve of manual switching |
5 ÷ 6 |
| Bolt of a throttle cam |
6 ÷ 9 |
| Bolts of the reduktsionny valve |
5 ÷ 6 |
| Bolts of plates of klapanny assembly |
5 ÷ 6 |
| Bolts of the central support of AT |
24 ÷ 28 |
| Bolts of fastening of the hydrotransformer |
|
|
27 ÷ 42 |
|
|
48 ÷ 68 |
| Bolts Ý/m valves switches |
6 ÷ 12 |
| Bolt Ý/m the valve of the blocking coupling of the hydrotransformer |
5 ÷ 6 |
| Nuts of fastening of assembly of the lever of the selector |
18 ÷ 27 |
| Bolts of fastening of the lever of switching of modes of a transfer case |
22 ÷ 28 |
| Adjusting nut of a driving cable of AT |
2 ÷ 3 |
| Adjusting nut of a cable of gas |
15.7 ÷ 22.5 |
| Shpindelny bolt of the lever of the selector |
11.7 ÷ 16.7 |
| Screws of fastening of the indicator of position of the lever of the selector |
2.0 ÷ 3.0 |
| Screw of fastening of the handle of the lever of the selector |
2.0 ÷ 3.0 |