Kia Sportage>>
Governing bodies and operation receptions>>
Devices of ensuring comfort
Devices of ensuring comfort
Systems of ventilation, heating and air conditioning
Panel of switches
The scheme of distribution of air submitted to salon
The control panel is shown by functioning of systems of ventilation, heating and air conditioning on
an illustration
(see. Part car Equipment, arrangement of devices and governing bodies). In the same place location of To/in switches and an air circulation mode is shown.
The structure of the panel includes three rotary handles, TEMP designated by inscriptions, FAN and MODE.
The TEMP handle in the left part of the panel is intended for a choice of a temperature mode submitted via deflectors of the dashboard of air.
In the center of the panel the handle of a regulator of speed of rotation of the fan of the heater (FAN), having four fixed provisions is located:
OFF — the Fan is switched off.
1 — the Low-high-speed mode.
2 — the Mode of normal functioning.
3 — the First high-speed mode.
4 — the Second high-speed mode (the maximum frequency of rotation).
|
The fan of a heater functions only at the included ignition. |
In the right part of the panel the five-item handle of a choice of the directions of distribution of air (MODE) is located:
— Supply of air on obverse level, - in addition the direction of an air stream can be adjusted by means of correction of position of deflectors.
— Supply of air on obverse level and in foot wells, - in addition the direction of the top air stream can be adjusted by means of correction of position of deflectors. In foot wells warmer air, except a case when the corresponding regulator will turn out in extreme left situation moves.
— Supply of air in foot wells. The most part of air arrives in forward foot wells, smaller - on having blown in lateral glasses.
— Supply of air in foot wells and on having blown in a windscreen, - the conditioner for the purpose of ensuring the fastest removal of condensate is automatically activated. Air is distributed evenly in the stipulated directions with preservation weak обдува lateral glasses.
— Supply of air on having blown in a windscreen, - the conditioner for the purpose of ensuring the fastest removal of condensate is automatically activated. The air stream is distributed between deflectors обдува wind (most part) and lateral (a smaller part) glasses.
The structure of group of the switches located directly over the control panel includes two more switches, systems of ventilation/conditioning of salon concerning functioning: the To/in switch and the switch of a mode of air circulation (see. Section Governing bodies and salon equipment).
By means of the To/in switch designated by the pictogram with the image of a snowflake conditioner activation/deactivation is made. For compressor activation once press the switch button, - the light indicator built in it should light up. Shutdown To/in is made by repeated pressing the button.
Activation of a mode of circulation () (the indicator built in the switch burns) brings to giving shutdown into salon of fresh air. The repeated pressing the switch button (the indicator does not burn) allows to restore supply of air.
|
Long use of a mode of circulation, especially at disconnected To/in, leads to a zapotevaniye of glasses and increase of a spertost of air therefore it is recommended to activate this mode only in case of the valid need and for rather short time, for example, at movement on the district with the filled with smoke or zagazovanny atmosphere. As soon as need of isolation of salon will disappear, supply of fresh air should be renewed. |
Operation receptions
Ventilation
|
Turn the handle of a choice of the directions of distribution of air in situation and make sure that the mode of air circulation is switched off. By means of regulators of a choice of a temperature mode and speed of rotation of the fan create in salon comfortable conditions.
|
|
Heating
|
Turn the handle of a choice of the directions of distribution of air in situation and include an air circulation mode. By means of regulators of a choice of a temperature mode and speed of rotation of the fan create in salon comfortable conditions, in need of condensate removal from glasses, in addition activate К/В. If when heating salon it is required, that air arrived as well on obverse level, turn the corresponding handle in situation.
|
|
Condensate removal from glasses
|
Turn the handle of a choice of the directions of distribution of air in situation and make sure that the mode of air circulation is switched off. By means of regulators of a choice of a temperature mode and speed of rotation of the fan create in salon comfortable conditions. For the purpose of achievement of maximum efficiency of removal of hoarfrost from glasses turn regulators of a temperature mode and speed of rotation of the fan in extreme right situation.
If it is required, that air arrived also in foot wells, turn the handle of a choice of the direction of distribution in situation.
|
|
Air conditioning
|
Start the engine and activate To/in from the console push-button switch (see. Section Governing bodies and salon equipment). Turn the handle of a choice of the direction of distribution in situation. By means of regulators of a choice of a temperature mode and speed of rotation of the fan create in salon comfortable conditions. For the accelerated cooling of salon turn a regulator of a choice of a temperature mode extreme left situation and activate from the corresponding button (see. The section Governing bodies and the salon equipment) an air circulation mode, the fan start on the maximum turns.
|
|
|
When using To/in at movement uphill, and also in other road conditions demanding high return of capacity from the engine, watch indications of a measuring instrument of temperature of the engine and try not to allow an overheat of the last. In case of need switch off К/В. |
Additional information, recommendations
At a strong overheat of the car during parking on the sun in hot weather let out hot air from salon, having opened all windows.
For removal of the condensate which is forming on inside of glasses in rainy weather, activate one of two modes of functioning of system (or), or start To/in from its main switch (see. Section Governing bodies and salon equipment).
For maintenance of components of a refrigerator path To/in in working condition, start the compressor for some minutes not less often than once a month even if need for air conditioning is absent.
It is not necessary to worry, if after an intensive use To/in from a threshold of the right forward door water starts to drip, is is a sign of a normal state of a drainage drain of the condenser.
In case of an engine overheat functioning of To/in system can automatically be blocked. When the temperature of cooling liquid will decrease to normal value functioning of the compressor will renew.
|
Automatic temporary switching off of the To/in compressor occurs as well at complete squeezing of a pedal of gas. |