KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Body
   General information
   External equipment and body elements
      Removal, installation and adjustment of components of devices of cleaning and windscreen washing
      Removal, installation and adjustment of components of devices of cleaning and washing of back glass
      Removal and installation of a lattice of a fairing
      Removal and installation and cowl adjustment
      Removal and installation of bumpers
      Removal and installation of door rear-view mirrors
      Removal and installation of a folding arm of fastening of a spare wheel
      Body glazing - the general information
      Dismantling, removal, installation and adjustment of doors
      Design of a drive of door window regulators
      Design of a drive of door locks
   Salon equipment
Onboard electric equipment
Control body sizes
Schemes of electric connections


escort girl

Kia Sportage>> Body>> External equipment and body elements

External equipment and body элеиенты

Removal, installation and adjustment of components of devices of cleaning and windscreen washing

Scheme of the organization of cleaning of a windscreen

1 — Brushes of screen wipers
2 — Levers of screen wipers (leads)
3 — Э / the motor of a drive of screen wipers
4 — the Tank of liquid of washing of glass

5 — the Pump of supply of washing liquid
6 — the Submitting hose
7 — Assembly of drafts of a drive of screen wipers
8 — Nozzles of supply of washing liquid

Replacement of brushes

 PERFORMANCE ORDER

    Allocate the lever for subject replacement of a brush from a windscreen.
    Wring out a lock uvula in the lock of a brush and remove the last from a hook on the lever end.
    When landing a brush to the lever track reliability of a zashchelkivaniye of the lock.

Removal

Levers of screen wipers with brushes

 PERFORMANCE ORDER

    Make sure that screen wipers are in "parking" situation, - in case of need include ignition, start and again stop screen wipers.
    Dismantle a protective cap, release a fixing nut and remove the lever from a spindle of driving draft.

Electromotor of a drive of screen wipers

 PERFORMANCE ORDER

    Open a cowl and turn out four bolts of fastening of the electromotor of a drive of screen wipers.
    Disconnect electroconducting.
    Separate electromotor assembly from the panel of a fairing and, having hooked a screw-driver, separate from it draft of a drive of screen wipers.
    Remove the electromotor.

Drafts of a drive of screen wipers

 PERFORMANCE ORDER

    Turn out six fixing screws, release two clamps and remove a lattice (see. Section Removal and installation of a lattice of a fairing). Give a fixing bolt and a nut and, operating on the left side of the car, remove assembly of drafts of a drive of screen wipers from the fairing panel. Manually check freedom of rotation of sharnirny joints of assembly, in case of need add greasings.

The tank and the pump of supply of washing liquid

 PERFORMANCE ORDER

    Disconnect a negative wire from the battery. Disconnect electroconducting of the pump and a hose of supply of liquid.
    Turn out fixing bolts and take the tank with the pump established on it from an impellent compartment.

Installation

 PERFORMANCE ORDER

    Installation is made upside-down. Track correctness of a condition of the electromotor at connection to it driving draft, - brushes after installation should appear in "parking" situation. All fixture tighten with demanded effort.

Adjustment snuffled supply of washing liquid

 PERFORMANCE ORDER

    Adjustment is made by a povorachivaniye of a jet of a nozzle by the needle entered its working opening, - the stream should get to the correct place on glass.

In order to avoid a needle oblamyvaniye in a jet, it is necessary to "release" it previously, heating in a lighter flame.