KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Body
   General information
   External equipment and body elements
      Removal, installation and adjustment of components of devices of cleaning and windscreen washing
      Removal, installation and adjustment of components of devices of cleaning and washing of back glass
      Removal and installation of a lattice of a fairing
      Removal and installation and cowl adjustment
      Removal and installation of bumpers
      Removal and installation of door rear-view mirrors
      Removal and installation of a folding arm of fastening of a spare wheel
      Body glazing - the general information
      Dismantling, removal, installation and adjustment of doors
      Design of a drive of door window regulators
      Design of a drive of door locks
   Salon equipment
Onboard electric equipment
Control body sizes
Schemes of electric connections



Kia Sportage>> Body>> External equipment and body elements>> Removal and installation of bumpers

Removal and installation of bumpers

Front bumper

Details of installation of a front bumper

1 — the Front grille
2 — Lateral basic arms
3 — the Facing panel
4 — the Polymeric absorber of shock loadings

5 — the Amplifier
6 — the Basic arm
7 — the Shock arm
8 — the Insulator
9 — the Frame


 PERFORMANCE ORDER

  1. Remove from a bumper a gryazeotboynik.
  2. Turn out two (left and right) top lateral a bolt of fastening of a bumper.
FRT — Forward
  1. Remove lateral basic arms of fastening of a bumper.
  1. Give four adjusting waste nuts.
  1. Carefully remove a bumper from the car, - it will be reasonable to use the help of the assistant.
  2. Release sixteen clamps of fastening of the facing panel and the amplifier of a bumper. Divide a bumper into three sections (facing, a polymeric damper and the amplifier).
  3. Visually estimate a condition of the facing panel and a polymeric damper of absorption of shock loadings. Defective components replace.
  4. Installation is made upside-down, track observance of requirements of Specifications of Head the Body to efforts of a tightening of carving fixture.

Rear bumper

Details of installation of a rear bumper (1 of 2)

1 — Lateral basic arms
2 — the Facing panel
3 — the Polymeric absorber of shock loadings

4 — the Amplifier
5 — Slips
6 — Lamps of illumination of registration plate
7 — the Basic arm


Details of installation of a rear bumper (2 of 2).

 PERFORMANCE ORDER

  1. Turn out two fixing bolts and remove from a bumper a gryazeotboynik.
  2. Give four (on two from each party) adjusting waste nuts from below under a bumper.
  3. Disconnect electroconducting of fires of illumination of registration plate and backing fires.
  4. Remove a bumper.
  5. Release seventeen clamps of fastening of the facing panel and the amplifier of a bumper. Divide a bumper into three sections (facing, a polymeric damper and the amplifier).
  6. Visually estimate a condition of the facing panel and a polymeric damper of absorption of shock loadings. Defective components replace.
  7. Installation is made upside-down, track observance of requirements of Specifications of Head the Body to efforts of a tightening of carving fixture.