KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
   General information
   Assessment of a condition of components of a suspension bracket and steering drive
   Forward suspension bracket
      General information
      Removal and installation of components of assembly of the forward bridge
      Removal, check of a condition of components and installation of the stabilizer of cross-section stability
      Removal, service and installation of rack-mount assemblies
      Removal, service and installation of the top levers of a suspension bracket
      Removal, service and installation of the bottom levers of a suspension bracket
   Back suspension bracket
   Steering
   Suspension bracket geometry
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections



Kia Sportage>> Suspension bracket and steering>> Forward suspension bracket>> Removal, service and installation of the bottom levers of a suspension bracket

Removal, service and installation of the bottom levers of a suspension bracket

Removal

All models

 PERFORMANCE ORDER

  1. Hang out the car over the earth.
  2. Remove forward wheels.
  3. Remove the stabilizer of cross-section stability (see. Section of System of electric equipment of the engine).
  4. Release a fixing nut and take an axial bolt of fastening to the bottom lever of a basic fork of rack-mount assembly (see. Section Removal, service and installation of rack-mount assemblies).
  5. Disconnect from a rotary fist a tip of steering draft (see. Part Steering).
  6. Release a coupling bolt and liberate from a rotary fist a finger of a spherical support of the top lever of a suspension bracket (see. Section Removal, service and installation of the top levers of a suspension bracket).

Models 4 x 4

 PERFORMANCE ORDER

  1. Turn out bolts (2) fastenings of the bottom spherical support to lever assembly (1).
  1. Remove a rotary fist assembled with a power shaft (see. Head Transmission line).
  1. Take шплинт, release a koronchaty nut and by means of a special stripper liberate a spherical support (1) of a rotary fist.

Models 4 x 2

 PERFORMANCE ORDER

  1. Take шплинт, release a koronchaty nut and by means of a stripper liberate a spherical support from assembly of a rotary fist, - in case of need the spherical support can be dismantled from lever assembly after removal of the last from the car.

  1. The spherical support is fixed in a rotary fist by means of a koronchaty nut (1) (model 4 x 2).
  1. Vypressovyvaniye of the bottom spherical support from a rotary fist (model 4 x 2).

All models

 PERFORMANCE ORDER

  1. Release nuts of shpindelny bolts (2), take the last and remove lever assembly (1) from the car.

Service

 PERFORMANCE ORDER

  1. Examine on existence of deformations, cracks and other mechanical damages the bottom lever of a suspension bracket and an axial finger of fastening to it a basic fork of rack-mount assembly. Estimate a condition of rubber shpindelny plugs and a boot of a spherical support and a spherical tip of a head of an axial bolt. Defective components replace.
  1. Vypressovyvaniye and a zapressovyvaniye of rubber shpindelny plugs is made by means of the special adaptation, - before installation it is necessary to moisten the new plug with soap solution.
  1. Spherical in case of need the support is replaced assembled, no less than an axial finger of fastening of the basic plug of rack-mount assembly.

Installation

 PERFORMANCE ORDER

  1. Installation is made upside-down, - track observance of requirements of Specifications of Head the Suspension bracket and a steering to efforts of a tightening of carving fixture.