|
|
|
|
KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment General information and precautionary measures Search of causes of failures of electric equipment Safety locks - the general information Chain breakers - the general information The relay - the general information and check of serviceability of functioning Assembly blocks of safety locks/relay - the general information, removal, installation, replacement of safety locks System of timers and alarm gongs (ETWIS) - the general information, removal and installation of the operating module Check of serviceability of functioning of the switch of ignition Check of serviceability of functioning of podrulevy switches Check of serviceability of functioning of operating switches and electromotors of a drive of window regulators Check of serviceability of functioning of the operating switch and electromotors of adjustment of door rear-view mirrors Salonnye lamps - replacement of lamps, check of serviceability of functioning Replacement of lamps and check of serviceability of functioning of external lighting devices Removal, check of serviceability of functioning and installation of the breaker of indexes of turns / alarm system Removal, installation and adjustment of block headlights Safety cushions - the general information and precautionary measures SRS shutdown Reading of codes of malfunction of DTC Removal and installation of the module of a driver's safety cushion Removal, installation and adjustment of a contact cable drum of the module of a driver's safety cushion Removal and installation of the diagnostic module of safety cushions (ADU)
Control body sizes
Schemes of electric connections
|
|
|
|
Kia Sportage>> Onboard electric equipment>> Replacement of lamps and check of serviceability of functioning of external lighting devices
Replacement of lamps and check of serviceability of functioning of external lighting devices
Headlights
Replacement of lamps
|
|
Halogen lamps are filled with the gas which was under pressure and at damage can "blow up"! Try not to touch a lamp flask barehanded, - the fatty spots left on glass can be at the bottom of a lamp exit out of operation as a result of a local overheat. With a view of additional safety at service of halogen lamps it is necessary to put on goggles! |
|
|
Open a cowl.
|
|
Disconnect brought to the back party of a block headlight electroconducting.
|
|
|
Release a wire spring clamp.
|
Liberate a lamp from three grooves in assembly of a block headlight and establish instead of it replaceable.
Assembly is made as it should be, the return to an order of dismantle of components, - track reliability of fixing of components.
|
|
Check of serviceability of functioning of the switch of a choice of a mode of functioning of headlights
|
|
By means of an ohmmeter check correctness of distribution of conductivity between plugs of the contact socket of electroconducting of a block headlight from a plait in various positions of the lever of the left podrulevy switch (see the table). In case of need make the corresponding corrections / replace assembly of podrulevy switches.
Check of serviceability of functioning of the switch of a choice of a mode of functioning of headlights
|
|
The forward combined lamps
Replacement of lamps
|
|
The forward combined lamps are located from outer sides of block headlights and carry out a role of indexes of turns and parking/marker lights.
|
|
Open a cowl and find in the corresponding corner of an impellent compartment a white plastic ring.
|
Having pulled for a ring, liberate from a wing mudguard a spring clamp.
Accurately remove assembly of the forward combined lamp.
|
|
Having turned counter-clockwise before combination of lock uvulas with reciprocal grooves, take from lantern assembly a cartridge with the lamp planted in it.
|
Having pressed and having turned the lamp equipped with a bayonetny socle, take it from the boss.
Plant in a cartridge a replaceable lamp and make lamp assembly, - act as it should be, the return to an order of dismantle of components.
|
|
For a zashchelkivaniye of a spring clamp of assembly again pull for a plastic ring. |
|
|
Check of serviceability of functioning of switches of indexes of turns / marker lights
|
|
By means of an ohmmeter check correctness of distribution of conductivity between plugs of the contact socket of electroconducting of the forward combined lamp from a plait in various positions of the lever of the left podrulevy switch (see the table). In case of need make the corresponding corrections / replace assembly of podrulevy switches.
Check of serviceability of functioning of switches of forward indexes of turn / marker lights
|
|
Stoplight of the top level
Lamp replacement
5-door models
|
|
|
|
By means of a small screw-driver carefully drown the central pins of fixing clamps of a back cover of a stoplight of the top level.
|
Take clamps and uncover, - try not to lose components of clamps.
|
|
Having turned on 1/4 turns counter-clockwise, liberate a cartridge with the lamp established in it from a reflector of lantern assembly.
|
Having pulled, take a paw from the boss and establish on its place the replaceable.
Assembly is made as it should be, the return to an order of dismantle of components.
|
|
Cabriolet models
|
|
|
|
Turn out fixing screws and remove a lens of lantern assembly.
|
|
|
Accurately take a lamp from a casing and, having turned a cartridge on 1/4 turns counter-clockwise, liberate it from a reflector.
|
Having pressed and having turned, take equipped with a socle of bayonetny type a lamp from the boss and establish on its place the replaceable.
Assembly is made as it should be, the return to an order of dismantle of components.
|
|
The back combined lamps
Replacement of lamps
5-door models
|
|
|
|
Having pulled on itself for the provided dredging, accurately uncover access to a back loudspeaker.
|
Having wrung out a lock uvula, disunite the contact socket of electroconducting.
|
|
Give four nuts of fastening of lantern assembly.
|
|
|
Remove a lamp from the body panel of the car.
|
|
|
Having combined lock uvulas with reciprocal grooves, take the failed lamp and establish on its place the replaceable.
|
Assembly is made as it should be, the return to an order of dismantle of components.
|
|
Cabriolet models
|
|
|
|
Uncover access to the back combined lamp.
|
|
|
Having wrung out a lock uvula, disunite the contact socket of electroconducting, then release four fixing nuts and remove lantern assembly.
|
|
|
Having combined lock uvulas with reciprocal grooves, take the failed lamp and establish on its place the replaceable.
|
Assembly is made as it should be, the return to an order of dismantle of components.
|
|
Check
All models
|
|
By means of an ohmmeter check correctness of distribution of conductivity between plugs of the contact socket of electroconducting of the back combined lamp from a plait in various positions of the corresponding switches / датчиков-выключателей (see the table). In case of need make the corresponding corrections / replace the failed elements.
Check of serviceability of functioning of switches / датчиков-выключателей activation of lamps of the back combined lamps
|
|
Lamps of illumination of registration plate
Design and details of installation of lamps of illumination of registration plate
Replacement of lamps
|
|
Turn out two fixing screws and remove a lens of a faulty lamp of illumination of registration plate.
|
|
Having pulled down, liberate from lantern assembly a lampoderzhatel, then take (also simply pull a lamp down) from it fused lamp and establish on its place the replaceable.
|
Establish into place a lampoderzhatel and a lens, screw fixing screws.
|
|
|
|