KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Assembly blocks of safety locks/relay - the general information, removal, installation, replacement of safety locks
   System of timers and alarm gongs (ETWIS) - the general information, removal and installation of the operating module
   Check of serviceability of functioning of the switch of ignition
   Check of serviceability of functioning of podrulevy switches
   Check of serviceability of functioning of operating switches and electromotors of a drive of window regulators
   Check of serviceability of functioning of the operating switch and electromotors of adjustment of door rear-view mirrors
   Salonnye lamps - replacement of lamps, check of serviceability of functioning
   Replacement of lamps and check of serviceability of functioning of external lighting devices
   Removal, check of serviceability of functioning and installation of the breaker of indexes of turns / alarm system
   Removal, installation and adjustment of block headlights
   Safety cushions - the general information and precautionary measures
   SRS shutdown
   Reading of codes of malfunction of DTC
   Removal and installation of the module of a driver's safety cushion
   Removal, installation and adjustment of a contact cable drum of the module of a driver's safety cushion
   Removal and installation of the diagnostic module of safety cushions (ADU)
Control body sizes
Schemes of electric connections
Kia Sportage>> Onboard electric equipment>> Removal, installation and adjustment of block headlights

Removal, installation and adjustment of block headlights

General information

Block headlights are fixed on the basic arms located between a front grille and assemblies of forward indexes of turns. Fixing of a block headlight is carried out by means of two screws and one torsionny spring, two more screws serve for adjustment of the direction of an optical axis of a headlight. The lens of a headlight having an aerodynamic form fastens to a plastic reflector in which the halogen lamp equipped with the built in contact socket is fixed, - the lamp is inserted from the back party of assembly and fastens a spring clamp, the protective rubber boot is outside established.

Visually estimate a condition of lenses, lamps and sockets of electroconducting of block headlights, check a condition of a yellow 20-amperny safety lock in the assembly block.

Removal and installation

 PERFORMANCE ORDER

    Disconnect a negative wire from the battery. Release a spring clamp and remove the forward combined lamp (see. Section Replacement of lamps and check of serviceability of functioning of external lighting devices). Turn out fixing bolts. Disconnect electroconducting and remove a block headlight. Installation is made upside-down. Do not forget to adjust the direction of optical axes of headlights in summary.

Adjustment

 PERFORMANCE ORDER

    Adjustment of the direction of an optical axis of a headlight is made in the horizontal and vertical planes by means of two screws located from the top party of assembly.