KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
   Check of kompressionny pressure, assessment of a condition of cylinders
   Engine check by means of the vacuum gage
   Belts of a drive of auxiliary units
   Petrol models
   Diesel models
      Greasing system - the general information
      Removal and engine installation
      Removal and installation of components of a drive of GRM
      Check and adjustment of klapanny gaps
      Removal and installation of the inlet pipeline and final collector
      Service of a head of cylinders and components of the gas-distributing mechanism
      Dismantling and assembly of the block of cylinders, service of components
      Removal and installation of the pallet of a case
      Removal, installation and service of the oil pump
      Removal and installation of a maslookhladitel
      Removal and flywheel installation
      Removal and installation of masloraspylitel
      Replacement of epiploons of a cranked shaft
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Onboard electric equipment
Control body sizes
Schemes of electric connections

Kia Sportage>> Engine>> Diesel models>> Replacement of epiploons of a cranked shaft

Replacement of epiploons of a cranked shaft

Details of installation of epiploons of a cranked shaft and accompanying components (on an example of models from RKPP)

1 — a coupling Basket
2 — the Conducted disk of coupling
3 — the Flywheel
4 — the Face plate
5 — the case Pallet

6 — Maslozabornik with sealing laying
7 — Maslootrazhatel
8 — the Back cover with sealing laying (a back epiploon)
9 — Assembly of the oil pump (a forward epiploon)

Forward epiploon


  1. The forward epiploon is located in a nest in the case of the oil pump.
  2. Remove pump assembly (see. Section Removal, installation and service of the oil pump).
  3. Having hooked the wrapped-up soft rags a screw-driver, take an epiploon from the landing nest.
  4. Manually fill a new epiploon in a landing nest in its case.
  1. By means of a press and a suitable opravka (a piece of a pipe or a core an external dimeter of 45 mm) plant an epiploon in a nest aflush with a surface of the case of the pump, - rest an opravka only against a firm face surface of an epiploon.
  1. Installation is made upside-down. Do not forget about need of observance of requirements of Specifications of Head the Engine to efforts of a tightening of carving fixture.

Back epiploon


  1. The back epiploon is planted in a back cover of the engine.
  2. The order of performance of procedure is similar described above for petrol models (see. Section Replacement of epiploons of a cranked shaft).