Visually check a condition of a cover of a cable, - in case of identification of damages make replacement.
1 — the Cable of a drive of butterfly valves 2 — the Lever of a drive of butterfly valves 3 — the Driving cable of AT 4 — the Adjusting bolt
Squeeze out against the stop a pedal of gas and make sure of completeness of opening of butterfly valves of the engine. In case of need make the corresponding adjustment.
Wring out to the left a rubber boot and slightly, - before emergence of feeling of easy resistance, - extend and fix the cable core.
Measure size of a control gap, - demanded value makes 0.8 ÷ 1.5 mm. In case of need release a lock-nut and make the corresponding adjustment by rotation in the corresponding direction of an adjusting nut. In summary do not forget to tighten a lock-nut with demanded effort (2 ÷ 3 Nanometer).