KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
   General information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of the differential perepuskny valve regulator of pressure (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assembly of the vacuum amplifier of brakes
   Assessment of degree of wear, replacement of blocks of disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, assessment of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of the parking brake, adjustment of a driving cable
   Pumping of brakes
   Reading of codes of malfunctions of ABS/EBD, cleaning of memory of the processor
   Removal and installation of hydraulic and electronic ABS/EBD control units
   Removal, check installation of wheel ABS sensors
   Replacement of rotors of ABS sensors of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections
Kia Sportage>> Brake system>> Removal and installation of the lever of the parking brake, adjustment of a driving cable

Removal and installation of the lever of the parking brake, adjustment of a driving cable

Removal and installation

At removal act as numbering of components.

Details of installation of the lever of a drive of the parking brake

1 — the Cover of lever assembly
2 — the Adjusting nut
3 — I Will corrode electroconductings
4 — the Bolt

5 — the Sensor switch of activation of a control lamp
6 — the Lever of a drive of the parking brake
7 — the Handle
8 — the Button of an otpuskaniye of blocking
9 — the Spring


 PERFORMANCE ORDER

    Attentively study a condition of the removed components, defective details replace. Installation is made upside-down, - in summary do not forget to adjust a drive of the parking brake.

Adjustment

 PERFORMANCE ORDER

    Pull the lever up with effort  of 10 kgfs, - the course of the lever should make 6 ÷ 8 clicks of a ratchet, - in case of need make the corresponding adjustment. Start the engine and make some braking at car movement by a backing. Muffle the engine. Turn out the screw of fastening of a cover of a drive of the parking brake. Remove a clamp and execute demanded adjustment by rotation of an adjusting nut in a forward part of a driving cable. Having finished adjustment, include ignition and cock the lever of the parking brake on one click of a ratchet, - make sure of serviceability of operation of a control lamp of brake system in a combination of devices. Release the lever and check freedom of rotation of back wheels. Do not forget to establish into place a clamp of an adjusting nut.