KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
   General information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of the differential perepuskny valve regulator of pressure (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assembly of the vacuum amplifier of brakes
   Assessment of degree of wear, replacement of blocks of disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, assessment of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of the parking brake, adjustment of a driving cable
   Pumping of brakes
   Reading of codes of malfunctions of ABS/EBD, cleaning of memory of the processor
   Removal and installation of hydraulic and electronic ABS/EBD control units
   Removal, check installation of wheel ABS sensors
   Replacement of rotors of ABS sensors of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections



Kia Sportage>> Brake system>> Removal and installation of a pedal of a foot brake

Removal and installation of a pedal of a foot brake

Act as numbering of components.

Details of installation of a pedal of a foot brake

1 — the Clamp (is subject to replacement without fail)
2 — the Finger
3 — the Nut
4 — the Bolt
5 — the Returnable spring

6 — the Pedal
7 — the Remote plug
8 — Axial plugs
9 — the Rubber emphasis
10 — the Overlay of a block


 PERFORMANCE ORDER

    Estimate degree of wear of axial plugs and an overlay of a block, whether check will bend the lever of a pedal and whether the returnable spring weakened. Replace defective components. Installation is made as it should be, the return to an order of dismantle of components, - axial and remote plugs before landing grease with lithium greasing (NGLI No. 2). Track observance of requirements of Specifications of Head Brake system to efforts of a tightening of carving fixture. In summary do not forget to adjust a pedal (see. Section of Check and adjustment of a pedal of a foot brake).