KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
   General information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of the differential perepuskny valve regulator of pressure (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assembly of the vacuum amplifier of brakes
   Assessment of degree of wear, replacement of blocks of disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, assessment of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of the parking brake, adjustment of a driving cable
   Pumping of brakes
   Reading of codes of malfunctions of ABS/EBD, cleaning of memory of the processor
   Removal and installation of hydraulic and electronic ABS/EBD control units
   Removal, check installation of wheel ABS sensors
   Replacement of rotors of ABS sensors of forward wheels
Suspension bracket and steering
Onboard electric equipment
Control body sizes
Schemes of electric connections

Kia Sportage>> Brake system>> Pumping of brakes

Pumping of brakes

Hit of brake liquid on the painted body surfaces is interfaced to risk of damage of a paint and varnish covering, - it is necessary to delete casually got splashes immediately with dry rags or pure paper towels!


  1. Make sure that the GTTs tank is filled at least on 3/4, - do not allow lowering of level of liquid below this critical mark during all course of performance of pumping. Get support of the assistant.
  2. Hang out the car over the earth.
  3. Remove a protective cap from the gate of pumping of a support / the wheel cylinder of the brake mechanism of the first of served wheels of the car. Plant on the gate a transparent hose of suitable diameter, - the second end of a hose lower in transparent capacity partially filled with brake liquid.
Pumping of a support of the brake mechanism of a forward wheel.
Pumping of the wheel cylinder of the brake mechanism of a back wheel.
  1. Ask the assistant to squeeze out several times a pedal of a foot brake, then to fix it in the bottom situation.
  2. Weaken the gate and let out brake liquid from the wheel cylinder in capacity.
  3. Tighten the gate and ask the assistant to repeat procedure, - continue pumping until from the support/cylinder brake liquid will not start to be pushed out pure, free from air bubbles.

Do not forget to watch liquid level in the GTTs tank (see the prevention at the beginning of the section)!

  1. In summary reliably tighten the gate, make sure of lack of signs of leaks and plant a protective cap. At once collect traces of the spilled liquid.
  2. Operating in a similar manner, pump over brake mechanisms of the remained wheels.
  3. In summary modify liquid level in the GTTs tank (see. Head Current leaving and service).