KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
   General information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of the differential perepuskny valve regulator of pressure (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assembly of the vacuum amplifier of brakes
   Assessment of degree of wear, replacement of blocks of disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, assessment of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of the parking brake, adjustment of a driving cable
   Pumping of brakes
   Reading of codes of malfunctions of ABS/EBD, cleaning of memory of the processor
   Removal and installation of hydraulic and electronic ABS/EBD control units
   Removal, check installation of wheel ABS sensors
   Replacement of rotors of ABS sensors of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections


free dumps

Kia Sportage>> Brake system>> Assessment of degree of wear, replacement of blocks of disk brake mechanisms of forward wheels

Assessment of degree of wear, replacement of blocks of disk brake mechanisms of forward wheels

Assessment of degree of wear

 PERFORMANCE ORDER

  1. Original brake shoes are equipped with indicators of wear of frictional slips. Liberated from under a slip body the wire indicator starts to rub during braking about a disk surface, publishing high-frequency squeal, - immediately replace blocks.
  1. The visual assessment of degree of wear of frictional overlays of blocks of forward brake mechanisms can be made through special observation ports in back walls of supports (see an illustration), - the minimum admissible thickness makes 2.0 mm, - in case of need replace blocks.
  2. In case of need remove blocks and make more detailed studying of their condition, - measurement of thickness of a frictional slip is made from the basis of a metal substrate (see an illustration).

Replacement

For rubbing of components of brake mechanisms it is necessary to use special means, or methyl alcohol, - at all do not apply solvents on an oil basis!

Blocks should be made in a set for brake mechanisms of both forward wheels.


 PERFORMANCE ORDER

  1. Hang out the car over the earth and remove forward wheels.
  2. Turn out pair of directing bolts and remove a support of the brake mechanism, - without disconnecting a flexible brake hose tie up a support to suspension bracket elements.
Reversing of directing bolts of the brake mechanism of a forward wheel.
The removed support follows, without disconnecting from it a flexible brake hose, to tie up to suspension bracket elements.

Will turn out alternatively enough only bottom directing bolt and to cast away a support up, having developed it rather top bolt.

  1. Take from an anchor bracket of the brake mechanism old blocks.
  1. By means of a special clamp wring out the working piston of a support in the wheel cylinder.
  1. Fill in an anchor bracket new brake shoes, - track correctness of placement of a spring clamp.
  2. Lower a support on the regular place, screw directing bolt (ы) and tighten them with demanded effort.
  3. Operating in a similar manner, replace blocks of the second brake mechanism.
  4. Establish to the place of a wheel and lower the car on the earth.