KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
   General information and security measures
   Checks and adjustments of a pedal of a foot brake
   Check of the lever of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of the differential perepuskny valve regulator of pressure (model without ABS and EBD)
   Removal and installation of a pedal of a foot brake
   Removal, service and installation of the main brake cylinder
   Removal and installation of assembly of the vacuum amplifier of brakes
   Assessment of degree of wear, replacement of blocks of disk brake mechanisms of forward wheels
   Dismantling of the brake mechanism of a forward wheel, assessment of a condition of a disk
   Removal and installation of flexible brake hoses of a hydraulic path of brake mechanisms of forward wheels
   Service of drum-type brake mechanisms of back wheels
   Removal and installation of the lever of the parking brake, adjustment of a driving cable
   Pumping of brakes
   Reading of codes of malfunctions of ABS/EBD, cleaning of memory of the processor
   Removal and installation of hydraulic and electronic ABS/EBD control units
   Removal, check installation of wheel ABS sensors
   Replacement of rotors of ABS sensors of forward wheels
Suspension bracket and steering
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections
Kia Sportage>> Brake system>> Removal and installation of hydraulic and electronic ABS/EBD control units

Removal and installation of hydraulic and electronic ABS/EBD control units

Details of installation of electronic and hydraulic ABS/EBD control units

1 — the Electronic control unit (ECU)
2 — the Basic arm of HECU
3 — the Fixing pin

4 — Elektromotor of the pump
5 — Elektroprovodka
6 — Gidromodulyator (HCU)


 PERFORMANCE ORDER

    Switch off ignition. Disconnect electroconducting from the electronic control unit (ECU).

Try not to allow casual giving of an onboard food (12 In) on any of ECU plugs!

    Carefully wipe a hydromodulator (HCU) surface, having completely removed from it dirt and greasing traces. Previously having marked, disconnect from HCU hydraulic lines. Turn out bolts of fastening of a basic arm of the hydromodulator to a wing mudguard in an impellent compartment of the car. Remove the hydromodulator assembled with a basic arm and the electronic control unit (ECU).
    Take a fixing pin, dismantle the landing plug and remove HECU assembly from a basic arm.
    Turn out fixing bolts and remove from HECU assembly the electronic control unit (ECU). Check sealing the elements ECU on existence задиров and cracks, - in case of need make replacement. Installation is made upside-down, - track correctness of connection of hydraulic lines (be guided on put in the course of dismantle, - to identification labels), and also behind observance of requirements of Specifications of Head Brake system to efforts of a tightening of carving fixture. In summary pump over a hydraulic path of brake system (see. The section Pumping of brakes) also make trial runs of the car.