KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
   Security measures and the general rules accepted at service of components of fuel paths of internal combustion engines
   Power supply system of petrol engines
      General information
      Check and adjustment of quantity of turns of the single course/the moment of ignition/concentration WITH
      Sbrasyvaniye of pressure in fuel system of the petrol engine, filling of a fuel path
      Power supply system checks
      Removal and installation of components of an inlet air path
      Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve
      Removal and installation of a fuel tank
      Removal and installation of the fuel pump
      Removal and installation of the sensor of a stock of fuel
      Removal and installation of the control and locking valve
      Removal and installation of submitting and returnable lines of a fuel path
      Removal and installation of a jellied mouth of a fuel tank and separator of fuel evaporations
      Removal and installation of the filter of thin cleaning of a fuel path
      Removal and installation of a regulator of pressure of fuel
      Removal and installation of the toplivoraspredelitelny highway
      Removal and installation of fuel injectors
   Power supply system of diesel engines
   Control systems of the engine and decrease in toxicity of the fulfilled gases
   System of production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections



Kia Sportage>> Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases>> Power supply system of petrol engines>> Sbrasyvaniye of pressure in fuel system of the petrol engine, filling of a fuel path

Sbrasyvaniye of pressure in fuel system of the petrol engine, filling of a fuel path

Before starting to work, familiarize with materials of the Section of the Security measure and the general rules accepted at service of components of fuel paths of internal combustion engines.

Sbrasyvaniye of pressure

During performance of described procedure only superfluous pressure in a power supply system path is dumped, thus continuing will fill топливопроводы fuel to be under some residual superfluous pressure, - before a detachment of fuel lines take the appropriate measures of precaution!


 PERFORMANCE ORDER

    Start the engine.
    Lift a back seat, unbend the rectangular valve of the panel of a carpet and disunite the socket (2) electroconductings of the fuel pump (1) in a service window of the panel of a floor.
    Wait spontaneous останова the engine, then switch off ignition and restore initial connection of electroconducting. Lower a back seat in regular situation.

Path filling

 PERFORMANCE ORDER

    After performance of procedures of service of the car, connected with need of a sbrasyvaniye of pressure for a power supply system, before the first start for the purpose of prevention of need of excessively long provorachivaniye of the engine it is necessary to make preliminary filling of a fuel path.
    By means of a suitable crossing point close among themselves plugs 1 (FUEL PUMP) and 5 (In +) the diagnostic DLC socket, - the socket is located in an impellent compartment, is fixed on a casing of an air purifier and equipped with a folding protective cover.
    Make 10-second (no more) ignition inclusion for the purpose of short-term activation of the fuel pump, - ignition inclusion more than for 10 seconds is interfaced to risk of a dangerous overheat of a crossing point. Switch off ignition and remove a crossing point. Examine components of a fuel path on existence of signs of development of leaks. In case of need make the corresponding corrections.