KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
   Security measures and the general rules accepted at service of components of fuel paths of internal combustion engines
   Power supply system of petrol engines
      General information
      Check and adjustment of quantity of turns of the single course/the moment of ignition/concentration WITH
      Sbrasyvaniye of pressure in fuel system of the petrol engine, filling of a fuel path
      Power supply system checks
      Removal and installation of components of an inlet air path
      Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve
      Removal and installation of a fuel tank
      Removal and installation of the fuel pump
      Removal and installation of the sensor of a stock of fuel
      Removal and installation of the control and locking valve
      Removal and installation of submitting and returnable lines of a fuel path
      Removal and installation of a jellied mouth of a fuel tank and separator of fuel evaporations
      Removal and installation of the filter of thin cleaning of a fuel path
      Removal and installation of a regulator of pressure of fuel
      Removal and installation of the toplivoraspredelitelny highway
      Removal and installation of fuel injectors
   Power supply system of diesel engines
   Control systems of the engine and decrease in toxicity of the fulfilled gases
   System of production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections



Kia Sportage>> Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases>> Power supply system of petrol engines>> Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve

Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve

Pedal

Details of installation of a pedal of gas

1 — the Cable of a drive of a butterfly valve
2 — the Basic arm

3 — the Clamp
4 — the Pedal
5 — the Returnable spring


 PERFORMANCE ORDER

  1. Make dismantle of components in an order corresponding to their numbering on an illustration.
  2. Installation is made upside-down.

Cable

 PERFORMANCE ORDER

  1. Make sure of completeness of closing of butterfly valves.
  2. Measure size of a free wheeling of a driving cable. If the result of measurement falls outside the limits an admissible range (1.0 ÷ 3.0 mm), make the corresponding adjustment by rotation of an adjusting nut (see an illustration).