KIA of Sportazh - Kia Sportage
Governing bodies and operation receptions
Current leaving and service
Engine
Systems of cooling, heating, ventilation and air conditioning
Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases
   Security measures and the general rules accepted at service of components of fuel paths of internal combustion engines
   Power supply system of petrol engines
      General information
      Check and adjustment of quantity of turns of the single course/the moment of ignition/concentration WITH
      Sbrasyvaniye of pressure in fuel system of the petrol engine, filling of a fuel path
      Power supply system checks
      Removal and installation of components of an inlet air path
      Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve
      Removal and installation of a fuel tank
      Removal and installation of the fuel pump
      Removal and installation of the sensor of a stock of fuel
      Removal and installation of the control and locking valve
      Removal and installation of submitting and returnable lines of a fuel path
      Removal and installation of a jellied mouth of a fuel tank and separator of fuel evaporations
      Removal and installation of the filter of thin cleaning of a fuel path
      Removal and installation of a regulator of pressure of fuel
      Removal and installation of the toplivoraspredelitelny highway
      Removal and installation of fuel injectors
   Power supply system of diesel engines
   Control systems of the engine and decrease in toxicity of the fulfilled gases
   System of production of the fulfilled gases
Systems of electric equipment of the engine
Five-step manual box of gear shifting
Automatic transmission
Transmission line
Brake system
Suspension bracket and steering
Body
Onboard electric equipment
Control body sizes
Schemes of electric connections



Kia Sportage>> Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases>> Power supply system of petrol engines>> Removal and installation of a fuel tank

Removal and installation of a fuel tank

Gasoline is extremely inflammable therefore at work with any components of fuel system it is necessary to accept special precautionary measures! Do not smoke, and do not come nearer to a venue of works with open fire or unprotected by the lamp shade carrying. Do not perform such works in the garages equipped with heating devices, working at natural gas (such, as водогреи, dryers, etc.)! The working platform should be ventilated well. At gasoline hit on skin immediately wash away it water with soap. At carrying out any works with fuel system put on goggles and hold near at hand the fire extinguisher. In case of a gasoline spillage immediately wipe a pool, but do not keep the rags impregnated with gasoline in places where the risk of its ignition is not excluded! See also preventions provided in the Section of the Security measure and the general rules, accepted at service of components of fuel paths of internal combustion engines.

Details of installation of a fuel tank

 PERFORMANCE ORDER

    Disconnect a negative wire from the battery. Lift a back seat and unbend the rectangular valve of the panel of a carpet of a floor. Through a special service window disunite sockets of electroconducting of the fuel pump/sensor of a stock of fuel (see an illustration). Turn out the screw of fastening of the tire of grounding.
    Turn out four fixing screws and uncover access to a fuel tank.
    Release fixing collars and disconnect from pump assembly two fuel hoses. Disconnect electroconducting from the pressure sensor in a fuel tank. Through a service opening release fixing collars and disconnect three fuel hoses from unions of assembly of a tank. Release a collar of fastening of a jellied mouth of a fuel tank. Hang out the car over the earth. By means of the elevating equipment hang out assembly of a fuel tank with the filter. Turn out 15-millimetric bolts of fastening of assembly of a tank with the filter. Accurately separate a tank from elements of a frame of the car, lower it on the elevating equipment and transfer on a workbench. At once закупорьте open unions of a tank suitable caps for the purpose of the exit prevention outside of fuel evaporations.
    Turn out two fixing bolts and separate from a tank (1) filter (2).
    Installation is made upside-down. Track correctness of landing and reliability of fixing of fuel hoses on the unions, - hoses of the main, returnable and isparitelny lines should stretch on unions at least on 25 mm, a jellied mouth - a minimum on 35 mm.