>> Current leaving and service
>> General information about settings and adjustments
General information about settings and adjustments
"Settings" in the real Management are meant as not separately taken procedure of adjustment any of parameters of systems of the car, and the whole complex of the adjustments, allowing to achieve maximum efficiency of return of the engine.
If the owner of the new car from the date of its acquisition strictly adhered to the Schedule of routine maintenance (see. Undressed the Schedule of routine maintenance), rather often carried out checks of critical parameters, supported demanded level of lubricant liquids, the engine will need extremely seldom performance of additional service and regenerative repair (over replacement of components subject to raised wear and expendables).
On the other hand, in case of the negligent relation to performance of procedures of regular maintenance and frequent violation of established periods of carrying out checks, efficiency of return of the engine will surely decrease sooner or later. The probability of emergence of such situation in case of acquisition of the car which was in the use is especially high. In such cases there is a need for performance of a complex of settings of the power unit over amount of works on routine maintenance of the car.
The first step at control or diagnostics of malfunctions of the engine working with lowered return always is check of kompressionny pressure in cylinders (see. Head the Engine) which analysis of results allows to estimate the general condition of internal components of the power unit and to draw up the plan of the forthcoming adjusting and/or recovery operations. For example, if check of kompressionny pressure revealed signs of serious internal wear of the engine, a usual complex of settings will be insufficiently for situation correction, and its carrying out is waste of time and means. In view of value of information received as a result of check of kompressionny pressure, it is necessary to charge its performance to rather skilled and qualified mechanic having necessary diagnostic devices.
Below lists of the main adjusting procedures, allowing to achieve maximum efficiency of return from the engine which was in a working mechanical order are provided.
- At each filling check level of impellent oil, the brake liquid cooling liquids and liquids of a washer of glasses;
- Not less than once a month check pressure of a rating of tires and level of cooling liquid of the engine in its broad tank;
- It is desirable, time during a season (for example, every spring and autumn) check GUR and ATF liquid level.